It is a super premium, latex based product for exterior use. It has smooth finish with slight sheen. The product withstands extreme weather conditions, resists fungal growth, high protection against alkali, UV degradation and water resistant properties because of the presence of silicon.
Deltasheen provides Decorative & Protective Exterior paint film. It gives durable & long lasting finish.
Deltasheen can reduce temperature upto5°C by Infrared Ray Block Technology.
Recommended use:
On masonary,primed plaster,weatherboards,concrete blocks,brickworks,cement render ceilings etc.
Surface preparation:
For fresh/new surfaces, strip all the loose particles from the surface with wire brushing and by scraping, followed by a wipe down. Wash the surface down with water and allow it to dry. Apply one coat of primer and allow it to dry for 6 to 8 hours.
For previously painted surfaces: Strip all the old paint and remove all the loose particles before starting the above process.
Directions for application:
- Dilute the paint as per the recommended dilution ratio.Thinning required is 40-50% by volume depending upon surface.
- Thinner/cleaner is potable water.
- Apply the first finishing coat and allow it to dry for at least 6 to 8 hours. After the first coat dries, apply the second coat and allow it to dry overnight.
- Moisture contents of wall.Ideal condition is less than 12%
- Ph value of surface should be between 7 to 11 under ideal conditions
- Strain the material through a fine sieve before use
- Keep the container tightly closed to prevent drying